part #s and pricing???

[iracemine]

hey mang,

I just cracked open my tranny and was hoping you could tell me what the parts I would need to do to get the "revised" shift forks and parts and what not. dont think I will or want to do the synchros since I cant get a straight answer about what the tolerances are and how to adjust them. oh, and prices too pls.

I gots a early 02' P5, and I am a victim of raping gears:hand:

[SpooledupRacing]

The best person to contact would be PDHAudio.. he knows his shit about what parts etc to use in the trannys...

I personally have not done tranny work in about 10 years and I don't touch FWD transmissions.

[kansei]

to the OP --your pricing through Mazda Motorsports will be better than anything else you can find for the parts you need.

as for what parts you actually need *backs away from thread slowly*

I seem to recall www.protegefaq.net having something on it but I just did a quick google site search on "shift fork" and no dice.

[iracemine]

fuck. I hate my local Mazda dealers. ok will try pat then.

[kansei]

fuck. I hate my local Mazda dealers. ok will try pat then.

I said Mazda Motorsports, not your local Mazda dealer. Dealer prices = rape.

You are a mazda motorsports racer member, right?

[iracemine]

I said Mazda Motorsports, not your local Mazda dealer. Dealer prices = rape.

You are a mazda motorsports racer member, right?

dont laugh, but no. I have never broken anything or needed anything to actually take advantage of this deal. so i have no idea how it works... I think you need to prove like three races and you get great deals on stock stuff, but where?? online or bring a card to the dealer????

[kansei]

dont laugh, but no. I have never broken anything or needed anything to actually take advantage of this deal. so i have no idea how it works... I think you need to prove like three races and you get great deals on stock stuff, but where?? online or bring a card to the dealer????

you need to link them or fax them results from at least two race events.

www.mazdaspeeddevelopment.com

edit: here's the link to the store/registration:
https://www.mazdamotorsports.com/webapp/wcs/stores/servlet/MazdaSportHomePageView?langId=-1&storeId=10001

but yeah you order the parts online, with ludicrously low prices (seriously some of the prices are friggin amazing), they ship from Ontario California (at least all the orders I've placed). you can call to place orders if you need help on part numbers, though they have an online catalog that is much improved and links to many PDF catalogs. All they care is that they are parts for your race car.

Mazdaspeed Motorsports Development + the racer parts program is what makes Mazda so amazing in grassroots motorsports IMO. They are unmatched in their support of racers big and small.

[SpooledupRacing]

Good luck IRaceMine, if this was my fortay I would help u out immediatly but to be honest the best thing I can do is to NOT get involved because this is something I have no experience in.

[iracemine]

once again this fucking site (forum) kicks ass!!!! thanks guys, and thanks for getting back to me so fast!!! Love spending my time here with this community.

note to self: donate.

[kansei]

yeah um get yourself registered on there and e-mail them links to your race results (assuming they're online). If you don't get e-mail confirmation of them receiving your results and fully unlocking your account and you need to order parts fast, give them a call and maybe they can help the process along.


then donate :)

[pdhaudio83]

So far:

Syncros:
(3 per trans) GC011726Y MSRP-47.80ea
(1) B50117265A MSRP-23.10
(1) G50417265B MSRP-24.50
(1) GC0217265 MSRP-41.20


Shafts (if you want) 1st & 2nd is part of the shaft
Main - G5S017201 MSRP-375.03
Secondary - GC0417301 MSRP-184.95
Main shaft lock nut - F52017628 MSRP-17.95
Sec shaft lock nut - F52117628A MSRP-16.85

Shift forks have been revised 3 times since the MP3... call the dealer, they'll have the newest part numbers.
3/4 fork is G501-17-40YA FORK,SHIF 38.50

Plastic oil tray/Oil passage:
G560-17-540A PASS,OIL 31.30

Axle seals:
F003-27-238B SEAL, OIL 6.35

Roller bearings for input/output shafts: (2ea)
G5R0-17-290A BEARING,T 28.10ea
G5P0-17-180A BEARING,T 18.60 ea

[kansei]

that $375.03 main shaft becomes $230.16 through Mazda Motorsports

$31.30 oil passage $19.12

mazda ftwwww

[01protegemp3]

that $375.03 main shaft becomes $230.16 through Mazda Motorsports

$31.30 oil passage $19.12

mazda ftwwww

i need to start auto-xing so i can get that kinda discount:) ive heard that you can get the oem msp turbo set up from them... TRUE?

[kansei]

yes true. it's just the callaway manifold, the turbo, and I think the hardlines for the water cooling.

no ecu, intercooler. actually I think the callaway s-pipe is included too. Enough that it can bolt on but not at all enough to work. It costs somewhere around $1500 for that (can't find the page right now).

but yes, everyone please go race your mazdas, it's hella fun :)

[DemonIAm]

Sounds like a great point to argue with the wife!

"I'm racing the car, to get cheap parts for the car, babe! I'm only doing it to save us money. I don't even like racing!!"

[iracemine]

what rtv should I get to put the trans case back togeather?????

I used RTV Ultra Black, seals like cement!