wiring up tweeters. getting the wire through the door

[redrocket]

hey guys.
im new to here so be nice! lol
i just bought 2 sets of alpine type s splits for my doors. the only problem im having is getting the wire for the tweeter through from the dash to the door.
i mounted the tweeter in the a pillar, and its all good there, and the speaker is mounted in the door. thats all good too.
the issue is getting the wire from the dash into the door.
the grommet is the only connection between the two, but i cant access it easily.
has ane one tried this before?
im desperate for help!
thank you.

[wes.pro5]

not an easy way to do it, just as you said. you can either try to access the stock wiring to the door and push the new wiring through there, or just leave it hanging. not really an easy way of making it clean. audio is a lot of work to keep clean.

[DemonIAm]

an easy way to run the wire is to get a piece of coat hanger wire (12" or so). Duct tape one end, just enough to keep the wire from hurting anything and duct tape the wire to the other end. now you can bend the hanger wire to get through the parts of the car's interior.