View Full Version : Ideas for water pump?
t3ase
02-02-2006, 09:44 PM
When I put my WW Evo hood on long ago, I never drilled the washer nozzle holes. I just remembered I had the hose which connects to the hood just chillin' and wondered if any of you had any "special" uses for it.
I remember some fool made the water shoot up and over the car to piss off people behind them, which is not what I'm looking for.
The more I think about it and type this, the more I just think I need to get out of the house and hook the damn thing back up normally and drill the holes.
Dexter
02-02-2006, 09:50 PM
I too did not drill holes for my nozzles on my evo8 hood. Fuck that.
I removed the plastic right by where the hood and windshield sort of meet up, and put one of the nozzles in there, and replaced the plastic. it didnt work all too good becuase the plastic sorta pinched the line, but once it gets warmer, its on my list of things to finish up and make sure it works. it may require drilling a hole or two for the hose or somethin...
anarchistchiken
02-02-2006, 10:31 PM
I ran mine to the headlight and created a forward facing water gun :D It's lots of fun for people who cut me off.
terbow
02-02-2006, 10:39 PM
i took the nozzles off my cavalier which go on the wiper blades so i didnt have to cut holes.
t3ase
02-02-2006, 11:13 PM
I ran mine to the headlight and created a forward facing water gun :D It's lots of fun for people who cut me off.
That's some impressive water pressure if it makes it far enough while moving to hit the car and not just come right back and spray your own.
vindication
02-02-2006, 11:16 PM
yeah, it's like pissing into the wind....
slug420
02-03-2006, 08:04 AM
i believe IC sprayer is a common re-use of the washer nozzles.
mine is just dangling in the engine bay tho for the past couple years
CrazyCaker
02-03-2006, 09:01 AM
mine is just dangling in the engine bay tho for the past couple years
That's how I had mine, until I decided to keep the vented hood on for the winter. I was pretty much forced to finally drill the washer nozzles in or I wouldn't be able to see.
Peepsalot
02-03-2006, 11:21 AM
Put a pilot light in front of it, and make it squirt gas. FLAMETHROWER!!!!
t3ase
02-03-2006, 11:33 AM
Put a one way check valve in it near the tank to ensure the fuel dosnt come back in it. Run a line out of the bay, under the car and ignite it with a spark plug hooked up to a switch. Instant flamethrower.
;D
vBulletin® v3.7.2, Copyright ©2000-2009, Jelsoft Enterprises Ltd.