sway bar endlinks part #

[greendragon]

I was at Mazda this morning and got these part #'s lenghts are bolt center to bolt center
B26R-28-170 7.5"
B30H-28-170B 6.25"
BJ0E-28-170 8"
EC01-34.150A 10" offset
LC62-34-170 12.75 " offset
LC70-34-170 7.75" offset
9994-01-000 nuts

[greendragon]

I was at Mazda this morning and got these part #'s lenghts are bolt center to bolt center
B26R-28-170 7.5"
B30H-28-170B 6.25"
BJ0E-28-170 8"
EC01-34.150A 10" offset
LC62-34-170 12.75 " offset
LC70-34-170 7.75" offset
9994-01-000 nuts

[TheMAN]

shorter front endlinks (from 99 pro) are required for some strut/coilover setups.... early k-sport coil overs as well as the ms adjustable struts require them

B26R-34-170

[TheMAN]

shorter front endlinks (from 99 pro) are required for some strut/coilover setups.... early k-sport coil overs as well as the ms adjustable struts require them

B26R-34-170

[greendragon]

shorter front endlinks (from 99 pro) are required for some strut/coilover setups.... early k-sport coil overs as well as the ms adjustable struts require them

B26R-34-170 Do you the lenght of the endlink ,if you do I'll add it to the first post for referance

[greendragon]

shorter front endlinks (from 99 pro) are required for some strut/coilover setups.... early k-sport coil overs as well as the ms adjustable struts require them

B26R-34-170 Do you the lenght of the endlink ,if you do I'll add it to the first post for referance

[TheMAN]

B26R-34-170 L=9"
LC62-34-170A L=12"

[MyZmZm]

I am installing the illuminas in a couple months along with lowering springs (about 1.2" all around), and I've been told that I should get the endlinks from the protege with the regular suspension. Would these be the LC62-34-170A? Is this the part number for both front and rear?

[TheMAN]

if you have the MP3/MSP sway bars, then you use the ones meant for those cars

all front end links are the same from 2000 on regardless of trim