PDA

View Full Version : Q about rims and tyres...


Anakin
05-10-2007, 02:19 PM
I´m soon buying new rims and i´m little confused about the size and ET and will they fit without rubbing...

The rims are Momo Corse 7,5x17 and tyres 215/40R17 Nangkang or Nexan. ET 42.

I´ve heard that there won´t be any problems. I´ve also heard that running 215/40R17 and 7,5x17 the ET shoud be 48?

Any opinions?

http://www.323fclub.com/kuva.php?kuva=jasenkuvat/Anakin/070510113945.jpg&base=1

TheMAN
05-11-2007, 04:22 AM
+42 will probably give you rubbing problems.. run +45 or +48 and it should be OK

iLLuminati
05-12-2007, 01:32 PM
ET 48 could be very tight on the strut...
ET45 would fit and also ET42... but i think there you must be careful on the outside of the rear fenders.... there it could rub

Anakin
05-12-2007, 03:43 PM
I´m seriously thinking to roll the fenders... So it won´t be a big problem. I was more afraid of rubbing the springs/inside.

killuminati
05-13-2007, 05:10 AM
no, ET48 would rub deffinitely..

stock on 6Jx15'' is ET45, so on 7,5J you have to put ET38..


here is just for show with momo course.. :thumb:

7,5Jx17'', ET38

http://img468.imageshack.us/img468/7740/dscf3947mediumbl9.th.jpg (http://img468.imageshack.us/my.php?image=dscf3947mediumbl9.jpg) http://img117.imageshack.us/img117/62/dscf3954mediumgz2.th.jpg (http://img117.imageshack.us/my.php?image=dscf3954mediumgz2.jpg)

http://img156.imageshack.us/img156/7859/dscf3958mediumcq0.th.jpg (http://img156.imageshack.us/my.php?image=dscf3958mediumcq0.jpg) http://img156.imageshack.us/img156/3697/dscf3959mediumgk1.th.jpg (http://img156.imageshack.us/my.php?image=dscf3959mediumgk1.jpg)


simulated 2 cm lowering.. :crazy:

http://img117.imageshack.us/img117/3904/dscf3993mediumfu1.th.jpg (http://img117.imageshack.us/my.php?image=dscf3993mediumfu1.jpg)


if you still have some doubts..

http://img87.imageshack.us/img87/1429/gumeql2.jpg

Anakin
05-13-2007, 06:16 AM
Is it possible that the ET is different in 2.0 sport and prefacelift models? Since my stock wheels are 7x16" (no idea what ET ) and 195/50R16 tires...

BTW those looks great! :thumbsup:

Is that tire/rim size chart available somewhere?

Joe
05-13-2007, 12:06 PM
2 Anakin: here it is :) http://www.rims-n-tires.com/rt_specs.jsp

Anakin
05-13-2007, 12:50 PM
Thanks dudes for the info! I think i´ll go and try one rim/tire and see what happens before i buy anything...