Tranny

[franciscoescn]

Well i'm finely going to put my tranny back together and would like to know if theres anything special i have to do before i seal it back up.

[pdhaudio83]

just remember to use good quality RTV :)

What all did you do to it?

[KrayzieFox]

I used RTV Ultra Black, seals like cement!

[franciscoescn]

just remember to use good quality RTV :)

What all did you do to it?

I changed the LSD and the secondary shaft.

[Focus]

I changed the LSD and the secondary shaft.

Did you re shim it to spec and check the backlash ?

[pdhaudio83]

Did you re shim it to spec and check the backlash ?

dude, you have some scary posts... if he didn't he's gonna be like OH SHIT ;)

[pdhaudio83]

I changed the LSD and the secondary shaft.

changed the lsd? can you shed some more light? quaife? stocker welded? was there a problem with the secondary shaft?

[franciscoescn]

Did you re shim it to spec and check the backlash ?

What do you mean about re shim and backlash?

[franciscoescn]

changed the lsd? can you shed some more light? quaife? stocker welded? was there a problem with the secondary shaft?

I got my lsd from ken its the stock welded one and the shaft brock from where it makes contact with the lsd

[Focus]

http://www.mazdaspd.com/resources/Transmission_Rebuild.pdf

[franciscoescn]

Ok so i got the tranny mounted but theres a problem. How the hell can i put the clutch fork in place? I put it on there and then it falls off when i push in the clutch. Does anybody have pictures or know how to do it?

[BRIAN MP5T]

Leave the clutch master cylinder off until it's together..