Focus
12-06-2007, 11:59 AM
I have the following for sale:
1. GT28RS Turbo with a modified compressor housing with a bigger wheel inside. Let's call it the MPI Stage II GT28RS.
The turbo is good for 400WHP+(theoretical 450WHP) with quick spool up time !!
The compressor housing is chrome plated, not just polished. Turbo was rebalanced before reassembly. There is absolutely no shaft play.
Turbine Housing is High Temp ceramic coated.
2. MAM Tubular Manifold. This manifold has been passed on a table at a machine shop to straighten out the flanges, then was put on their marble trueness table. It is perfectly straight. It also has the collector cleaned up with a rotary tool to correct and smoothen out the rough edges for better flow.
It is coated with TechLine 2000deg.F thermal coating. ( I will send a little extra coating in case you scratch it up a little. The coating is a very thin layer. It can be sprayed on with any type of paint gun or airbrush gun.)
Pricing is as follows:
I want $950 for the turbo and $800 for the manifold.
If someone buys this as a set, I will offer free shipping.
I Will not sell the manifold separately UNLESS the turbo sells first...
Thanks for reading this and now on to the pictures...
http://www.urbanmontreal.com//images/turbo/12062007130.jpg
http://www.urbanmontreal.com//images/turbo/12062007131.jpg
http://www.urbanmontreal.com//images/turbo/12062007132.jpg
http://www.urbanmontreal.com//images/turbo/12062007133.jpg
http://www.urbanmontreal.com//images/turbo/12062007134.jpg
1. GT28RS Turbo with a modified compressor housing with a bigger wheel inside. Let's call it the MPI Stage II GT28RS.
The turbo is good for 400WHP+(theoretical 450WHP) with quick spool up time !!
The compressor housing is chrome plated, not just polished. Turbo was rebalanced before reassembly. There is absolutely no shaft play.
Turbine Housing is High Temp ceramic coated.
2. MAM Tubular Manifold. This manifold has been passed on a table at a machine shop to straighten out the flanges, then was put on their marble trueness table. It is perfectly straight. It also has the collector cleaned up with a rotary tool to correct and smoothen out the rough edges for better flow.
It is coated with TechLine 2000deg.F thermal coating. ( I will send a little extra coating in case you scratch it up a little. The coating is a very thin layer. It can be sprayed on with any type of paint gun or airbrush gun.)
Pricing is as follows:
I want $950 for the turbo and $800 for the manifold.
If someone buys this as a set, I will offer free shipping.
I Will not sell the manifold separately UNLESS the turbo sells first...
Thanks for reading this and now on to the pictures...
http://www.urbanmontreal.com//images/turbo/12062007130.jpg
http://www.urbanmontreal.com//images/turbo/12062007131.jpg
http://www.urbanmontreal.com//images/turbo/12062007132.jpg
http://www.urbanmontreal.com//images/turbo/12062007133.jpg
http://www.urbanmontreal.com//images/turbo/12062007134.jpg